Series Connection
SLPO12-100: This type of model cannot be connected in series.
Other models:
• All batteries must be at 100% SOC before connecting in series.
• A maximum of 4 batteries can be connected in series.
When buying batteries, please tell us that you need to use them in series so that we can provide the same batch.
It is forbidden to use different batches of batteries in series or to mix them with other batteries.
Parallel Connection
• All batteries must be at 100% SOC before connecting in parallel.
• A maximum of 4 batteries can be connected in parallel.
When buying batteries, please tell us that you need to use them in parallel so that we can provide the same batch.
It is forbidden to use different batches of batteries in parallel or to mix them with other batteries.
Series-Parallel Connection
Under no circumstances can batteries be connected in series-parallel.
Charge / Discharge Current
Under no circumstances can the charge current or discharge current exceed the peak current.
Charging Voltage
Under no circumstances should the charging voltage exceed 14.4Vdc for more than 60 seconds.
Charge Cycle
During the charging cycle, you must always ensure that the constant voltage limit and the constant current limit are never exceeded.
Alarm
In case of alarm, immediately rectify / attend to the causes of the alarm.
Physical Damage
In case the battery is physically damaged due to any event, do not install and energize the battery. Please contact us as soon as possible.
Short Circuit
Ensure precautions to prevent short-circuits under all circumstances.